语言版本
产品中心

首页 - 产品中心

返回上一级
产品中心

FACTORY 

The Hengsheng KN95 respirator is manufactured by the Hengsheng Group, a long-time highly successful toy manufacturing company that has responded to the worldwide need to provide high quality protective respirators suitable for both healthcare personnel and everyday citizens. Unlike many makeshift facemask factories, the Hengsheng Group has made substantial investments into the best, most sophisticated manufacturing equipment available to make consistent high quality respirators.



Pure Water System


QUALITY CONTROL

Hengsheng, with its long established history in manufacturing and quality control management, prides itself in developing the most rigorous quality control management program for its respirators, with investments into the most-state-of-the-art equipment and laboratory to continually assess quality and performance throughout each and every production of respirators.


Hengsheng’s rigorous quality control program includes regular sampling and testing of materials at each stage throughout the entire production process all the way from the sourcing and manufacture of raw incoming materials to the final finished product. 


Respiratory Resistance Tester

Microbiological Microscope

Microbial Limit Tester

Laser Dust Particle Counter

High and Low Temperature Aging Test Chamber

Particulate Filter Efficiency Tester 


Flame Retardant Performance Tester


Smart Ball Anemometer

Precision Scale

Conductivity Meter

Spectrophotometer 


Microbiological Test Incubator 


Constant Temperature Water Bath


Glasswear Airflow Dryer 


Hengsheng KN95 Respirator

The Hengsheng KN95 respirator is a superior quality filtering facepiece respirator that provides  ≥95% filtration efficiency against non-oil based aerosols and particles including biological airborne pathogens. It has a bi-fold anatomically conforming 3D shape, five layers of filtration, an adjustable nose clip, and latex free and ultrasonic loops.


Features:

1. Five-layer filtration design compared to typical three or four layers in other KN95s

2. Exceptional breathability with low inhalation and exhalation resistance

3. Ergonomic bi-fold 3D shape design accommodating variable face sizes and shapes to provide a better fit and seal compared to the traditional cup respirator design

4.The elastic loops are latex-free and ultrasonically sealed.







User Instructions: 


IMPORTANT: Before use, the wearer must read and understand these User Instructions. Keep these User Instructions for reference


Dear User,


The Hensheng KN95 filtration facepiece respirator is intended to reduce wearer’s exposure to non-oil based aerosols and particles including biological airborne pathogens.


Features and Specifications:

Hengsheng KN95 Filtration Facepiece Respirator 

Five layer design achieves a filtration efficiency of > 95%

Exceptional breathability with low inhalation and exhalation resistance

A bi-fold 3D ergonomic design

Ultrasonic sealed elastic straps, non-allergenic, latex-free 

No Exhalation Valve

Aerosol Type: Non-oil


Intended Use:

The Hengsheng KN95, non-surgical disposable particulate filtration facepiece respirator is intended to reduce wearer’s exposure to non-oil based aerosols and particles including biological airborne pathogens. 


Do Not Use For: 

Do not use for gases and vapors, oil aerosols, or sandblasting; particulate concentrations that exceed either 10 times the occupational exposure limit or applicable government regulations, whichever is lower. Do not use in atmospheres containing less than 19.5% oxygen. Do not use for oil-based particles. 


Use Limitations and Warnings:

  1. The wearer must first be trained in the proper use and fit tested before using this respirator. 

  2. Wash and dry your hands prior to putting on the respirator.

  3. Inspect the respirator for tears or damage. Examine all the respirator parts for signs of damage including the straps and noseclip and discard if any discrepancy is found.

  4. Discard and replace respirator if it becomes damaged or breathing resistance becomes excessive. 

  5. Do not alter, abuse or misuse this respirator. 

  6. Do not use with beards or other facial hair or other conditions that prevent a good seal between the face and the sealing edge of the respirator. 

  7. Failure to follow all instructions and warnings on the use of this respirator and/or failure to wear this respirator during all times of exposure can reduce respirator effectiveness.

  8. Outside forces acting upon the noseclip on the respirator may result in injury to the wearer. 

  9. This respirator is intended to be used only once. 

  10. This respirator is not washable. Washing will damage the structure of the filter material and reduce the filtering performance of the respirator.


Fitting Instructions:


Clean your hands with soap and water or hand sanitizer before touching the respirator.


  1. Open the respirator pulling up and down the folds of the respirator.

  2. With the noseclip facing up, position the respirator under the chin and pull the two straps over each ear. Adjust the straps as comfortable as possible.

  3. Place the fingertips of both hands at the top of the molded nosepiece. Mold the nosepiece to the shape of the nose bridge by pushing inwards while moving your fingertips down both sides of the nosepiece. 

  4. Check respirator tightness before entering work area. 

  1. Cover the front of the respirator with both hands, being careful not to disturb the position of the respirator.

  2. Exhale sharply. If air leaks around the nose bridge, readjust the nosepiece as described in step 4. If air leaks at the respirator edges, work the straps back along the side of your hand. If you CANNOT achieve a proper seal, DO NOT use. 

  3. If no leakage is detected, then proceed with use.


To remove the respirator: remove it from behind (do not touch the front of the respirator); discard in a closed bin. 


Storage Conditions: Store in a clean, hygienic and ventilated dry place with less than 80% relative humidity. 


Shelf Life: Shelf life of unopened product is 2 years from date of manufacture when stored within a temperature range of -20°C to +30°C and at less than 80% relative humidity. 


Manufacturer:

Hengsheng  Industrial Co., Ltd

Wukeng Industrial Zone

Longhu Town, Jinjiang City, ChinaZip Code: 362200

Tel: +86-0595-83235555

Website: www.hengsheng-group.com



关注恒盛集团